# FieldPOC

A simple to use, good enough phone system for medium sized DECT networks.

## Setup

FieldPOC requires a Mitel SIP DECT phone system, i.e. RFP L43 WLAN.
Make sure you have the equipment, else this software is quit useless.

Get a computer, i.e. an APU Board, and install Archlinux on it.
This can be a VM too, but you have to adapt stuff.

### Config

Create a file `fieldpoc_config.json`.
This is your FieldPOC config in JSON format.
You will add details to it with each step.

### Networking

We assume you use two network interfaces `enp2s0` and `enp3s0`.
Configuration examples are for systemd-networkd.

```
systemctl enable --now systemd-networkd.service
```

Your FieldPOC box will act as a normal DHCP Client on `enp2s0`.
This is the interface you connect to the internet and where you may connect to the box via SSH.

`/etc/systemd/network/20-wired.network`
```
[Match]
Name=enp2s0

[Network]
DHCP=yes
```

The other interface `enp3s0` will be the DECT network.
This is the network where you connect your RFPs.
We will run a dedicated DHCP Server on this network.

`/etc/systemd/network/30-dect.network`
```
[Match]
Name=enp3s0

[Network]
Address=10.222.222.1/24
```

As the DHCP Server for this network we use `kea`.

```
pacman -S kea
```

`/etc/kea/kea-dhcp4.conf`
```
{
  "Dhcp4": {
    "interfaces-config": {
      "interfaces": [
        "enp3s0"
      ]
    },
    "lease-database": {
      "name": "/var/lib/kea/dhcp4.leases",
      "persist": true,
      "type": "memfile"
    },
    "option-def": [
      {
        "code": 43,
        "encapsulate": "sipdect",
        "name": "vendor-encapsulated-options",
        "space": "dhcp4",
        "type": "empty"
      },
      {
        "code": 10,
        "name": "ommip1",
        "space": "sipdect",
        "type": "ipv4-address"
      },
      {
        "code": 19,
        "name": "ommip2",
        "space": "sipdect",
        "type": "ipv4-address"
      },
      {
        "code": 14,
        "name": "syslogip",
        "space": "sipdect",
        "type": "ipv4-address"
      },
      {
        "code": 15,
        "name": "syslogport",
        "space": "sipdect",
        "type": "int16"
      },
      {
        "code": 224,
        "name": "magic_str",
        "space": "dhcp4",
        "type": "string"
      }
    ],
    "subnet4": [
      {
        "option-data": [
          {
            "data": "10.222.222.1",
            "name": "routers"
          }
        ],
        "pools": [
          {
            "pool": "10.222.222.100 - 10.222.222.200"
          }
        ],
        "reservations": [
          {
            "hostname": "<name of your oom>",
            "hw-address": "<mac address of your oom>",
            "ip-address": "10.222.222.11",
            "option-data": [
              {
                "data": "<name of your oom>",
                "name": "host-name"
              },
              {
                "name": "vendor-encapsulated-options"
              },
              {
                "data": "10.222.222.11",
                "name": "ommip1",
                "space": "sipdect"
              },
              {
                "data": "OpenMobilitySIP-DECT",
                "name": "magic_str"
              }
            ]
          }
        ],
        "subnet": "10.222.222.0/24"
      }
    ]
  }
}
```

Start the service.

```
systemctl enable --now kea-dhcp4
```

### Database

```
pacman -S postgresql
```

Init database.

```
su - postgres -c "initdb --locale en_US.UTF-8 -D '/var/lib/postgres/data'"
```

```
systemctl enable --now postgresql
```

Open SQL shell

```
sudo -u postgres psql
```

Create database and user for routing engine.
Change the password.

```
CREATE USER fieldpoc WITH PASSWORD 'fieldpoc';
CREATE DATABASE fieldpoc WITH OWNER fieldpoc;
```

Add the database credetials to your `fieldpoc_config.json`.

```
{
  "database": {
    "host": "127.0.0.1",
    "username": "fieldpoc",
    "password": "fieldpoc",
    "database": "fieldpoc"
  }
}
```

### Phone Server

```
pacman -S yate
```

Remove all files in `/etc/yate/` and add the following instead:

#### Dialout SIP connection

`accfile.conf`
```
[dialout]
enabled=yes
protocol=sip
registrar=10.222.222.254
username=dialout
password=xxx
```

#### Call deduplication

`cdrbuild.conf`
```
[parameters]
X-Eventphone-Id=false
```

#### Yate remote control socket

`extmodule.conf`
```
[listener fieldpoc]
type=tcp
addr=127.0.0.1
port=5039
```

Add the information for the remote control socket to `fieldpoc_config.json`:

```
{
  "yate": {
    "host": "127.0.0.1",
    "port": 5039
  }
}
```

#### Database connection

Replace credentials with the ones you have choosen.

`pgsqldb.conf`
```
[default]
host=127.0.0.1
database=fieldpoc
user=fieldpoc    
password=fieldpoc
```

#### Call routing

`regexroute.conf`
```
[default]
${username}^$=-;error=noauth
^iocaste$=goto dialin
^99991001$=tone/dial
^99991002$=tone/busy
^99991003$=tone/ring
^99991004$=tone/specdial
^99991005$=tone/congestion
^99991006$=tone/outoforder
^99991007$=tone/milliwatt
^99991008$=tone/info
^.*$=line/\0;line=dialout

[dialin]
${sip_x-called}^.*$=lateroute/\1
```

#### User registration

`register.conf`
```
[general]
expires=30

user.auth=yes
user.register=yes
user.unregister=yes
engine.timer=yes
;call.preroute=no
call.cdr=yes
linetracker=yes

[default]
priority=10
account=default

[user.auth]
query=SELECT password FROM users WHERE username='${username}' AND password IS NOT NULL AND password<>'' AND type='user' LIMIT 1;
result=password

[user.register]
query=INSERT INTO registrations (username, location, oconnection_id, expires) VALUES ('${username}', '${data}', '${oconnection_id}', NOW() + INTERVAL '${expires} s') ON CONFLICT ON CONSTRAINT uniq_registrations DO UPDATE SET expires = NOW() + INTERVAL '${expires} s'

[user.unregister]
query=DELETE FROM registrations WHERE (username = '${username}' AND location = '${data}' AND oconnection_id = '${connection_id}') OR ('${username}' = '' AND '${data}' = '' AND oconnection_id = '${connection_id}')

[engine.timer]
query=DELETE FROM registrations WHERE expires<=CURRENT_TIMESTAMP;

[call.cdr]
critical=no

[linetracker]
critical=yes
initquery=UPDATE users SET inuse=0 WHERE inuse is not NULL;DELETE from active_calls;
cdr_initialize=UPDATE users SET inuse=inuse+1 WHERE username='${external}';INSERT INTO active_calls SELECT username, x_eventphone_id FROM (SELECT '${external}' as username, '${X-Eventphone-Id}' as x_eventphone_id, '${direction}' as direction) as active_call WHERE x_eventphone_id != '' AND x_eventphone_id IS NOT NULL and direction = 'outgoing';
cdr_finalize=UPDATE users SET inuse=(CASE WHEN inuse>0 THEN inuse-1 ELSE 0 END) WHERE username='${external}';DELETE FROM active_calls WHERE username = '${external}' AND  x_eventphone_id = '${X-Eventphone-Id}' AND '${direction}' = 'outgoing';
```

### DECT

Just choose one of your RFPs as your OMM.
Find out the MAC address and fill it in the according fields in the kea config before.

Create a privileged user account and add the credentials to `fieldpoc_config.json`:

```
{
  "omm": {
    "host": "10.222.222.11",
    "username": "omm",
    "password": "<password>"
  }
}
```

### FieldPOC

Make sure Python is installed.

```
pacman -S python
```

Install FieldPOC:

```
pip install git+https://git.clerie.de/clerie/fieldpoc@main
```

FieldPOC provides a telnet socket for debugging and state mangement, add config for this to `fieldpoc_config.json` too:

```
{
  "controller": {
    "host": "127.0.0.1",
    "port": 9437
  }
}
```

## Usage

### Init

Some datastructures have get prepared once:

```
fieldpoc -c /path/to/fieldpoc_config.json -e /path/to/fieldpoc_extensions.json --init
```

### Run

```
fieldpoc -c /path/to/fieldpoc_config.json -e /path/to/fieldpoc_extensions.json
```

## Debug

Show log messages:

```
fieldpoc -c /path/to/fieldpoc_config.json -e /path/to/fieldpoc_extensions.json --debug
```

## Development setup

Make sure you have [mitel_ommclient2](https://git.clerie.de/clerie/mitel_ommclient2) in your Python modules path.

Add user credentials to your OMM to `fieldpoc_config.json`.

Edit `fieldpoc_extensions.json` to meet your preferences.

Start FieldPOC:

```
python -m fieldpoc.run
```

List some options:

```
python -m fieldpoc.run --help
```